How exactly to link a computer up to a Projector

How exactly to link a computer up to a Projector

More In This area Click to reveal navigation links on mobile.

Who to make contact with

ITS Provider Center

  • Monday-Thursday 8:00am-8:00pm
  • Friday 8:00am-4:30pm
  • Saturday & Sunday 12:00pm-5:00pm
    1. Setup the projector dealing with the display, and plug in the power cord. Set your laptop beside the projector.
    2. Plug one end of VGA cable (shown above) in to the COMPUTER 1 IN slot regarding the projector.
    3. Plug the other end of this VGA cable into your laptop’s monitor slot. It to your laptop if you have a display adapter for your laptop, connect that to the VGA cable before connecting.
    4. Switch on your laptop computer first. Then switch on the projector by very very first turning power key to | and then push the top energy button. The lamp will need one minute to heat up and show. When there is a display issue, continue steadily to step 5.
    5. Change your monitor ( simply simply click on your own laptop computer type below for details): Windows InstructionsMacintosh Instructions

    Windows Instructions

    On your laptop computer, hold the FN key down and press the display key (the F key aided by the monitor icon) to improve your display.

    You may be offered the choice to decide on what you need to accomplish:

    You may need to adjust the your laptop’s resolution to 1024×768 after you have set the display mode.

    • Right-click in your desktop back ground and select characteristics or Graphic qualities. -or-

    • Click the Settings tab or General Settings and also make yes the display screen quality is scheduled to 1024×768. -or-
    • Select Apply then okay .
    • Keep with # 6 below.

    Macintosh Instructions

    • Head to Apple menu>System preferences.
    • Choose Displays choice, then head to Arrangement tab.
    • Click Detect Shows key.
    • Check out the Mirror Displays checkbox if you’d like the display that is same show up on the projector.
    • Check Show shows in menu bar , then pick 1024×768 under LCD Projector on the menu bar pulldown:

    You will need to choose Display Preferences… There will be a pane on your MacBook and a pane on the Projector if 1024×768 is not an option. Find the projector pane and set to 1024×768 with the cheapest frequency.

    In the event that you nevertheless usually do not notice a display after following these directions, look at the supply regarding the projector. Listed here are two different projector key plans:

    Choose COMPUTER 1 input switch


    Select PROVIDER switch, make use of the arrow secrets to choose COMPUTER 1, then push the ENTER switch.

    Once you are completed aided by the projector, please push the top energy key twice allowing the fan to switch on and cool off before unplugging the energy cable.


    Then try switching the display once again if the projector is still not projecting your laptop after following the instructions above, check to be sure all connections are plugged in all the way, and. If you should be nevertheless not able to link, please call x3407 for support.

    + There are no comments

    Add yours